Loading...
Searching...
No Matches
board.h
Go to the documentation of this file.
1/*
2 * SPDX-FileCopyrightText: 2023 Gunar Schorcht
3 * SPDX-License-Identifier: LGPL-2.1-only
4 */
5
6#pragma once
7
17
18#include "cpu.h"
19#include "periph/gpio.h"
20
21#ifdef __cplusplus
22extern "C" {
23#endif
24
29
30#define LED0_PIN GPIO_PIN(PB, 1)
31#define LED1_PIN GPIO_PIN(PC, 30)
32#define LED2_PIN GPIO_PIN(PC, 31)
33
34#define LED0_PORT PORT->Group[PB]
35#define LED0_MASK (1 << 1)
36#define LED1_PORT PORT->Group[PC]
37#define LED1_MASK (1 << 30)
38#define LED2_PORT PORT->Group[PC]
39#define LED2_MASK (1 << 31)
40
41#define LED0_ON (LED0_PORT.OUTSET.reg = LED0_MASK)
42#define LED0_OFF (LED0_PORT.OUTCLR.reg = LED0_MASK)
43#define LED0_TOGGLE (LED0_PORT.OUTTGL.reg = LED0_MASK)
44
45#define LED1_ON (LED1_PORT.OUTCLR.reg = LED1_MASK)
46#define LED1_OFF (LED1_PORT.OUTSET.reg = LED1_MASK)
47#define LED1_TOGGLE (LED1_PORT.OUTTGL.reg = LED1_MASK)
48
49#define LED2_ON (LED2_PORT.OUTCLR.reg = LED2_MASK)
50#define LED2_OFF (LED2_PORT.OUTSET.reg = LED2_MASK)
51#define LED2_TOGGLE (LED2_PORT.OUTTGL.reg = LED2_MASK)
52
53#ifndef WS281X_PARAM_PIN
54#define WS281X_PARAM_PIN GPIO_PIN(PC, 24)
55#endif
56#ifndef WS281X_PARAM_NUMOF
57#define WS281X_PARAM_NUMOF (1U)
58#endif
60
65#define MTD_0 mtd_dev_get(0)
66#define MTD_1 mtd_dev_get(1)
67
68#define CONFIG_SDCARD_GENERIC_MTD_OFFSET 1
70
78#if MODULE_SDCARD_SPI || DOXYGEN
79#define SDCARD_SPI_PARAM_SPI SPI_DEV(1)
80#define SDCARD_SPI_PARAM_CLK GPIO_PIN(PB, 27)
81#define SDCARD_SPI_PARAM_MOSI GPIO_PIN(PB, 26)
82#define SDCARD_SPI_PARAM_MISO GPIO_PIN(PB, 29)
83#define SDCARD_SPI_PARAM_CS GPIO_PIN(PB, 28)
84#define SDCARD_SPI_PARAM_POWER GPIO_UNDEF
85#endif
87
88#ifdef __cplusplus
89}
90#endif
91
gpio.h
Low-level GPIO peripheral driver interface definitions.