Shared files and configuration for the IoTlab boards. More...

Detailed Description

Shared files and configuration for the IoTlab boards.

Files
file	board_common.h
	Board specific definitions for the iotlab-m3 board.

file	gpio_params.h
	Board specific configuration of direct mapped GPIOs.

file	periph_conf_common.h
	Peripheral MCU configuration for the iotlab-m3 board.

Set the default baudrate to 500K for this board
#define	STDIO_UART_BAUDRATE (500000U)

Xtimer configuration
Tell the xtimer that we use a 16-bit peripheral timer
#define	XTIMER_WIDTH (16U)

ztimer configuration
#define	CONFIG_ZTIMER_USEC_TYPE ZTIMER_TYPE_PERIPH_TIMER

#define	CONFIG_ZTIMER_USEC_DEV TIMER_DEV(0)

#define	CONFIG_ZTIMER_USEC_MIN (2)

Define the interface to the AT86RF231 radio
{spi bus, spi speed, cs pin, int pin, reset pin, sleep pin}
#define	AT86RF2XX_PARAM_CS GPIO_PIN(PORT_A, 4)

#define	AT86RF2XX_PARAM_INT GPIO_PIN(PORT_C, 4)

#define	AT86RF2XX_PARAM_SLEEP GPIO_PIN(PORT_A, 2)

#define	AT86RF2XX_PARAM_RESET GPIO_PIN(PORT_C, 1)

LED pin definitions and handlers
#define	LED0_PIN_NUM 2

#define	LED0_PORT GPIO_PORT_D
	GPIO port of LED 0.

#define	LED0_PORT_NUM PORT_D

#define	LED1_PIN_NUM 5

#define	LED1_PORT GPIO_PORT_B
	GPIO port of LED 1.

#define	LED1_PORT_NUM PORT_B

#define	LED2_PIN_NUM 10

#define	LED2_PORT GPIO_PORT_C
	GPIO port of LED 2.

#define	LED2_PORT_NUM PORT_C

Macro Definition Documentation

◆ AT86RF2XX_PARAM_CS

#define AT86RF2XX_PARAM_CS GPIO_PIN(PORT_A, 4)

Definition at line 66 of file board_common.h.

◆ AT86RF2XX_PARAM_INT

#define AT86RF2XX_PARAM_INT GPIO_PIN(PORT_C, 4)

Definition at line 67 of file board_common.h.

◆ AT86RF2XX_PARAM_RESET

#define AT86RF2XX_PARAM_RESET GPIO_PIN(PORT_C, 1)

Definition at line 69 of file board_common.h.

◆ AT86RF2XX_PARAM_SLEEP

#define AT86RF2XX_PARAM_SLEEP GPIO_PIN(PORT_A, 2)

Definition at line 68 of file board_common.h.

◆ CONFIG_ZTIMER_USEC_DEV

#define CONFIG_ZTIMER_USEC_DEV TIMER_DEV(0)

Definition at line 56 of file board_common.h.

◆ CONFIG_ZTIMER_USEC_MIN

#define CONFIG_ZTIMER_USEC_MIN (2)

Definition at line 57 of file board_common.h.

◆ CONFIG_ZTIMER_USEC_TYPE

#define CONFIG_ZTIMER_USEC_TYPE ZTIMER_TYPE_PERIPH_TIMER

Definition at line 55 of file board_common.h.

◆ LED0_PIN_NUM

#define LED0_PIN_NUM 2

Definition at line 76 of file board_common.h.

◆ LED0_PORT

#define LED0_PORT GPIO_PORT_D

GPIO port of LED 0.

Definition at line 77 of file board_common.h.

◆ LED0_PORT_NUM

#define LED0_PORT_NUM PORT_D

Definition at line 78 of file board_common.h.

◆ LED1_PIN_NUM

#define LED1_PIN_NUM 5

Definition at line 80 of file board_common.h.

◆ LED1_PORT

#define LED1_PORT GPIO_PORT_B

GPIO port of LED 1.

Definition at line 81 of file board_common.h.

◆ LED1_PORT_NUM

#define LED1_PORT_NUM PORT_B

Definition at line 82 of file board_common.h.

◆ LED2_PIN_NUM

#define LED2_PIN_NUM 10

Definition at line 84 of file board_common.h.

◆ LED2_PORT

#define LED2_PORT GPIO_PORT_C

GPIO port of LED 2.

Definition at line 85 of file board_common.h.

◆ LED2_PORT_NUM

#define LED2_PORT_NUM PORT_C

Definition at line 86 of file board_common.h.

◆ STDIO_UART_BAUDRATE

#define STDIO_UART_BAUDRATE (500000U)

Definition at line 38 of file board_common.h.

◆ XTIMER_WIDTH

#define XTIMER_WIDTH (16U)

Definition at line 48 of file board_common.h.