Loading...
Searching...
No Matches
board.h
Go to the documentation of this file.
1/*
2 * SPDX-FileCopyrightText: 2020 Koen Zandberg <koen@bergzand.net>
3 * SPDX-FileCopyrightText: 2023 Gunar Schorcht <gunar@schorcht.net>
4 * SPDX-License-Identifier: LGPL-2.1-only
5 */
6
7#pragma once
8
19
20#include "board_common.h"
21#include "periph/gpio.h"
22
23#ifdef __cplusplus
24extern "C" {
25#endif
26
31#define BTN0_PIN GPIO_PIN(PORT_A, 0)
32#define BTN0_MODE GPIO_IN
33#define BTN0_INT_FLANK GPIO_RISING
34
35#define BTN1_PIN GPIO_PIN(PORT_C, 13)
36#define BTN1_MODE GPIO_IN
37#define BTN1_INT_FLANK GPIO_RISING
39
44#define LED0_PIN GPIO_PIN(PORT_B, 5)
45#define LED0_MASK (1 << 5)
46#define LED0_ON (GPIOB->BC = LED0_MASK)
47#define LED0_OFF (GPIOB->BOP = LED0_MASK)
48#define LED0_TOGGLE (GPIOB->OCTL ^= LED0_MASK)
49
50#define LED1_PIN GPIO_PIN(PORT_B, 0)
51#define LED1_MASK (1 << 0)
52#define LED1_ON (GPIOB->BC = LED1_MASK)
53#define LED1_OFF (GPIOB->BOP = LED1_MASK)
54#define LED1_TOGGLE (GPIOB->OCTL ^= LED1_MASK)
55
56#define LED2_PIN GPIO_PIN(PORT_B, 1)
57#define LED2_MASK (1 << 1)
58#define LED2_ON (GPIOB->BC = LED2_MASK)
59#define LED2_OFF (GPIOB->BOP = LED2_MASK)
60#define LED2_TOGGLE (GPIOB->OCTL ^= LED2_MASK)
61
62#define LED_RED_PIN LED0_PIN
63#define LED_GREEN_PIN LED1_PIN
64#define LED_BLUE_PIN LED2_PIN
66
71#define MTD_0 mtd_dev_get(0)
73
78#define SDCARD_SPI_PARAM_SPI SPI_DEV(0)
79#define SDCARD_SPI_PARAM_CS GPIO_PIN(PORT_B, 12)
80#define SDCARD_SPI_PARAM_CLK GPIO_PIN(PORT_B, 13)
81#define SDCARD_SPI_PARAM_MISO GPIO_PIN(PORT_B, 14)
82#define SDCARD_SPI_PARAM_MOSI GPIO_PIN(PORT_B, 15)
84
85#ifdef __cplusplus
86}
87#endif
88
gpio.h
Low-level GPIO peripheral driver interface definitions.